Metalltec-Tools
Diesel generator KS 6100HDE
Diesel generator KS 6100HDE
Regular price
€1,349.00 EUR
Regular price
€1,659.00 EUR
Sale price
€1,349.00 EUR
Unit price
per
Tax included.
Couldn't load pickup availability
Technical specifications
This article is free of shipping costs
Operating voltage 230
Maximum power, kW 5.5
Rated power, kW 5.0
Frequency, Hz 50
Current (max), A 23.91
Sockets 1 x Schuko 230 V, 1 x CEE 230 V 32 A
Running time at 50% load, h*** 8.5
LED display voltage in volts, frequency, running hours counter
Noise level Lpa (7m)/Lwa, dB 71/96
Socket 12V, А 12/8.3
Engine model KS 440HD-V
Engine type Diesel 1-cylinder, 4-stroke with air cooling
Engine power, hp/kW 12.0/8.83
preheating function +
Fuel tank volume, l 11
Engine oil capacity, l 1.65
Displacement, cm3 418
Voltage regulator Intelligent AVR system
Manual/electric starter
Frame diameter 32mm, round
Battery, Ah 30
ATS connection
-
Net dimensions (LxWxH), mm 730×495×630
Gross dimensions (LxWxH), mm 775×500×655
Net weight, kg 107
Gross weight, kg 115
Protection class IP23M
Barcode 4260405362592
Produced in PRC.
***Fuel consumption depends on numerous factors: total load of the connected consumers, fuel quality, outside temperatures (summer / winter), air pressure and altitude above sea level, technical condition of the generator.
BRAND MOTORS
As for gasoline generators, engines for diesel generators are manufactured under license from DIMAX Int. Manufactured and provided with its own brand and logo. In all models, the power reserve of the engine in relation to the generator allows it to generate the specified voltage and keep it stable over the entire voltage range. All engines are tested for long continuous operation and then dismantled and inspected for faults. Each engine and generator has an individual serial number. This allows us to monitor the production and service quality. The engines meet all world and European standards for quality, economy and environmental friendliness (especially for pollutant and noise levels).
INCREASED ENGINE LIFE
HEAVY DUTY diesel generators are not only suitable as a backup power source, but also for full continuous operation. The engine life is more than 3000 hours of operation, which is confirmed by multi-hour or multi-stage tests and a guarantee. Of course, the engines are that powerful when operated properly and maintained routinely.
USER-FRIENDLY ERGONOMIC CONTROL PANEL
The user-friendly ergonomic control panel allows you to easily operate the entire group without requiring any additional skills. A modern intelligent LED display will always show you the operating hours, frequency and voltage values. The displayed information will help you to correctly assess the load on the device and timely carry out the maintenance of the generator, thereby extending the life of the device.
PREHEATING FUNCTION (PREHEATER)
All HEAVY DUTY diesel generators are equipped with a pre-heating function (PREHEATER) with which you can start the generator effortlessly in winter.
AVR
HEAVY DUTY generators from the Könner & Söhnen series are equipped with an intelligent AVR voltage stabilization system. It allows both to keep the output voltage of the generator at a constant value of 230 W and to protect the generator from unwanted short circuits and overloads.
FRAME REINFORCEMENT
Thanks to the additional frame reinforcement with the upper protective bars, the HEAVY DUTY generator of the professional series can be used in severe working conditions. In addition, the frame construction provides the fuel tank with additional protection against damage during operation and transport.
RUBBER PADS FOR FRAME PROTECTION
The additional rubber pads (included in delivery) ensure corrosion protection for all Könner & Söhnen diesel generators. Thanks to the pads, no floor covering or frame paintwork is damaged when the generator is working. A transport kit is also available.
ADDITIONAL ACCESSORIES
The generator is equipped with additional accessories: adapter plug 2P+PE 16 A 230 V, adapter plug 2P+Е 32 A 230 V, open-end wrench 8x10 mm, open-end wrench 12x14 mm, open-end wrench 17x19 mm, L-wrench 6.0 mm, РН2.
Shipping
-
Parcel shipping Germany
- within Germany a flat rate of €5.90 under an order value of €100
- Wear parts and small parts €3.49
- From an order value of 100€ we deliver free of charge
-
Parcel shipping Austria
- within Austria a flat rate of €10.90 under an order value of €100
- Wear parts €4.49
- From an order value of 100€ we deliver free of charge
-
freight forwarding
- From a delivery weight of 40kg we charge a flat rate of €79.00 within Germany and €89.00 for deliveries to Austria!
shipping time
-
Germany
2-5 business days
-
Austria
3-8 business days
-
Longer shipping time
- Tiger 182/230 2-5 weeks
- Venison BARRACUDA 2-5 weeks
FAQ
What is the wear parts guarantee?
We want you to have the right consumables for your torch.
If you order wearing parts from us and you notice that they are not
fit on the burner, then there are two easy options. they send
return the items and get the right ones sent straight to you. Or you
get your money back. Complete! Simple and always guaranteed that you get the right ones
have wear parts.
May I test my item in advance?
At Metalltec-Tools you can of course test the items with us in advance.
You also get a free demonstration when you buy a device, for example
would like. Just send a message to the chat and we'll set one up
Meeting!
With which providers do we ship the items?
DHL, UPS, Hermes. With these providers, our items are sent to you as quickly as possible.
I'm not sure if this is the right article...
No problem, just write a short message in the chat.
If you want, you can of course also get one for free
Consultation. Just send the phone number in the chat. We call
you back as soon as possible!
Further questions?
Then just write a message in the chat or via Whatsapp!
We are here for you!